(THIS KIT SERVICES MOST AMERICAN MANUFACTURED MOTORCYCLES.)
1-1/4”DR. BIT RATCHET HANDLE
1-1/4”DR. SLIDING T-HANDLE
1-1/4”DR. 4” EXTENSION BAR
6-1/4”DR. SOCKETS: 1/4”, 5/16”, 3/8” (CABLE ADJUSTMENT), 7/16” (SADDLEBAG ADJUSTMENT), 1/2” (CLUTCH CABLE, MIRRORS & PINCH BOLTS), 9/16” (BELT ADJUSTMENT & CLUTCH CABLE)
1-1/4”DR. SPEED DRIVER
1-1/4”FEMALE TO 3/8” MALE ADAPTER
1-1/4”DR. COUPLER (1/4”HEX)
1-3/8”DR. COUPLER (5/16”HEX)
2-3/8”DR. SPARK PLUG SOCKETS: 5/8 & 13/16 INCH
5-1/4”HEX 2” HEX BITS: 1/8” (REAR BRAKE MASTER CYLINDER RESERVOIR), 5/32” (HANDLE BAR CONTROLS), 3/16” (MISC. COVER), 7/32” (CLUTCH PRESSURE PLATE ADJUSTMENT & LONG WRENCH FOR TURNING PLUG SOCKETS), 1/4”
2-5/16”HEX 3” HEX BITS: 5/16” (AIR CLEANER COVER & FILTER, REAR PASSENGER FOOT PLATE & BRAKE CALIPER REMOVER), 3/8” (FOR TRANSMISSION DIP STICK)
2-5/16”HEX 1-3/16” TORX BITS: T40 (REAR ROTORS), T45 (GAS TANK REMOVAL, PRIMARY DRAIN PLUG REMOVAL & BATTERY HOLD DOWN)
4-1/4”HEX 3” TORX BITS: T15 (HANDLE BAR), T25 & T30 (USED ON SWITCHES & CLUTCH & DERBY COVER), T27 (OUTER FAIRING, IGNITION SWITCH CAP & HOUSING, CONTROL LEVER FASTENERS, DERBY COVER HOUSING & CHAIN COVER INSPECTION)
2-1/4”HEX 3” SCREWDRIVER BITS: SLOTTED 1/4” & PHILLIPS #2 (MIRROR, MASTER CYLINDER, IGNITION SWITCH BUTTON, SEAT REMOVAL, TURN SIGNAL LIGHT LENS & HEAD LIGHT REPLACEMENT)
1-1/4”HEX 4” SCREWDRIVER BIT: SLOTTED 3/8INCH (MISC. ADJUSTMENTS)
1-10MM COMBINATION WRENCH (BATTERY CABLE WRENCH)
1-8” ADJUSTABLE WRENCH
1-SPARK PLUG GAP TOOL: 0.02” TO 0.10”